Commercial Demolition: Built for Tight Timelines & Tough Sites

Demolition Don handles the ugly work without the ugly aftermath. We plan the fall, protect what stays, and keep your schedule moving — stores that can’t miss a weekend, offices with picky landlords, restaurants with more stainless than sense. Utilities verified, inspectors looped in, neighbors calm, debris out fast. Clean pad, clean paperwork, clean exit.

Capabilities That Keep GCs Smiling

• Interior gut & de-fit: walls, ceilings, MEP fixtures, finishes — surgical, dust-controlled.
• Structural takedowns: engineered sequences, spotters, fence lines, clear egress.
• Concrete/Masonry: slab saw-cutting, footing/stoop/chimney removal, load-out & haul.
• Sensitive sites: hospitals, retail, schools — off-hour options and tenant coordination.
• Recycling & documentation: metals, clean concrete tickets, diversion summaries.

Industries We Serve

• Retail & restaurants (white-box & de-brand)
• Office & education (phased, occupied)
• Light industrial & warehouses
• Healthcare & specialty (containment, negative air)
• Hospitality & multifamily common areas

Our Process: Plan • Protect • Perform • Pass-Off

1. Scope lock-in: what goes, what stays, protection plan, phasing.
2. Permits & utilities: we help with permits; gas/electric/water/sewer verified/capped.
3. Controlled demo: dust walls, HEPA, sectional removal, debris sorted as we go.
4. Logistics & swaps: roll-off timing that never blocks your dock or neighbors.
5. Clean handoff: sweep, rake, magnet roll; photos & documents on request.

Unknowns (double sheathing, hidden slabs, surprise utilities) are flagged early with options — proceed, pause for inspection, or value-engineer.

Out Links: Pick Your Next Move

Residential Demolition: Clean Tear-Outs, Calm Neighbors, Ready for What’s Next

Demolition Don handles house demos and interior gut jobs without turning your property into a war zone. We protect what stays, remove what goes, and keep the street and neighbors happy. Utilities verified. Permits coordinated. Debris sorted and hauled so your next trade can start on time. It’s demolition done like a checklist, not a gamble.

What We Handle, Start to Finish

• Selective interiors: kitchens, baths, basements, finishes — dust control & floor protection.
• Full structures: single-family, small multi-family, accessory buildings.
• Exterior elements: decks, sheds, fences, chimneys, stoops, porches.
• Concrete & hardscape: slab cutting, driveway/walk removal, footings, retaining walls.
• Site cleanup: rake, magnet roll, debris out — not “pile it and run.”

Our Process: Plan • Protect • Perform • Pass-Off

1. Scope lock-in: what goes, what stays, protection plan, neighbor notes, HOA rules.
2. Utilities & permits: gas/electric/water/sewer verified or capped; we help with permits as needed.
3. Controlled demolition: clear egress, dust walls/HEPA where needed, debris sorted as we go.
4. Logistics & swaps: roll-off timing that doesn’t block driveways or mailboxes.
5. Clean handoff: sweep, rake, magnet roll; photos/docs on request.

Unknowns (double sheathing, hidden slabs, surprise utilities) are flagged early with options — proceed, pause for inspection, or value-engineer.

Out Links: Pick Your Next Move

Mobile Home Demolition — Fast, Clean, No Circus

Single-wide, double-wide, add-ons and all — Demolition Don takes it down without turning your lot into a scrapyard. We verify utilities, pull permits where required, detach porches/carports/skirts, break down the structure in a controlled sequence, and haul everything off the property. Neighbors stay calm, parks stay happy, and you get a clean pad ready for the next move.

What We Handle

• Detach & remove add-ons: porches, decks, awnings, carports, skirting, sheds.
• Utilities & permits: coordinate disconnects; permit help where required.
• Controlled takedown: sectional dismantle, compact equipment for tight parks.
• Debris & recycling: metal segregation, clean concrete tickets on request.
• Surface restoration: rake/magnet roll; pad removal or preservation per scope.

Transporting a unit instead of demo? We can coordinate haul-off via partners or strip for transport readiness.

Our Process: Plan • Protect • Perform • Pass-Off

1. Walkthrough & scope lock-in: what stays/goes, park rules, lot access, neighbors.
2. Utilities verified: electric, gas/propane, water, sewer/septic — shut/capped.
3. Removal sequence: add-ons, interior, roof/skin, frame/floor, anchors, pad (if included).
4. Debris flow: sorted loads (metal/concrete/wood) to control disposal costs.
5. Clean handoff: clear lot or specified finish (pad preserved or removed).

Out Links: Pick Your Next Move

Garage Demolition — Tight Sites, Clean Pulls, No Drama

Attached, detached, cinder block, stick-built, rotted roof, leaning like it’s trying to leave — Demolition Don takes it down without wrecking your driveway or your mood. We verify utilities, protect the house and fence lines, section the structure, and load out fast. Final rake, magnet roll, and you’re ready for whatever’s next — a new build, more yard, or just less ugly.

What We Handle

• Selective & full demo: garages, carports, lean-tos, attic lofts, shed add-ons.
• Materials: wood frame, CMU/block, brick veneer, metal panels, composite roofs.
• Concrete: slab/apron removal or preservation; saw cuts, controlled breaks, haul-off.
• Protection: house siding, windows, fence lines, trees; boards & barriers as needed.
• Debris & recycling: metal segregation, clean concrete tickets on request.

Our Process: Plan • Protect • Perform • Pass-Off

1. Walkthrough & scope lock-in: what stays/goes, access, neighbors, overhead lines.
2. Utilities & permits: electric/openers/lighting verified; permit help where required.
3. Controlled takedown: roof, walls, doors, then slab — with spotters & clear egress.
4. Debris flow: sorted loads for speed and cost control.
5. Clean handoff: rake, magnet roll, photo docs on request; pad removed or left per scope.

Unknowns (double roof layers, hidden rebar, surprise wiring) are flagged early with options — proceed, pause for inspection, or value-engineer.

Out Links: Pick Your Next Move

Shed Demolition — Small Building, Big Relief

Rotten roof, sinking slab, plastic resin kit that gave up on life — Demolition Don removes sheds cleanly without chewing up your lawn or your driveway. We verify utilities, protect fences and plantings, deconstruct in a controlled sequence, and haul everything away. Final rake, magnet roll, and a clear space for your next plan.

What We Handle

• All shed types: stick-built, prefab resin/metal kits, CMU/block outbuildings.
• Add-ons & contents: small decks, ramps, shelving; contents removal by arrangement.
• Protection: fence lines, gates, garden beds, irrigation; boards & ground mats when needed.
• Concrete & pads: preserve or remove slabs/aprons; saw cuts and controlled breaks.
• Recycling & disposal: metal segregation, clean concrete tickets on request.

Banned items: liquids, paints/solvents, fuels, batteries, asbestos. Tell us about chemicals — we’ll route you to the correct channel.

Our Process: Plan • Protect • Perform • Pass-Off

1. Walkthrough & scope lock-in: what stays/goes, gate width, tree limbs, neighbor exposure.
2. Utilities & permits: power/water verified or capped; permit help where required.
3. Controlled takedown: doors/shelves out, roof/skin off, walls down, floor/pad per scope.
4. Debris flow: sorted loads for speed and cost control; yard stays tidy.
5. Clean handoff: rake and magnet roll; photos/docs on request.

Out Links: Pick Your Next Move

Barn Demolition — Old Wood, New Space, No Headaches

Timber-frame beauties, tired pole barns, bank barns clinging to a hillside — Demolition Don takes them down clean, safe, and by the book. We verify utilities, respect property lines, set fence lines and spotters, and manage debris without tearing up your fields. Salvage what’s worth saving, recycle what’s recyclable, and leave you a clean site ready for next season’s plan.

What We Handle

• Structural takedown: sequenced removal with spotters, equipment sized for fields & tight lanes.
• Roof & skin: metal, shingle, slate; tin/board-and-batten siding; careful handling where salvageable.
• Concrete & stone: slabs, piers, fieldstone/rubble foundations; saw cuts and controlled breaks.
• Silos & extras: stave/steel/concrete silos, corn cribs, lean-tos, milk houses — by arrangement.
• Debris & recycling: metal segregation, clean concrete tickets, barn-wood salvage options.

No hazardous waste, liquids, pesticides, or fuel storage removal in the dumpster stream — we’ll route those through proper channels.

Our Process: Plan • Protect • Perform • Pass-Off

1. Walkthrough & scope lock-in: what stays/goes, salvage targets, equipment paths, soil protection.
2. Utilities & permits: power/water/LP verified or capped; permits coordinated as required.
3. Controlled takedown: roof/skin, framing, foundation — with dust, wind, and neighbor controls.
4. Debris flow: sorted loads and safe haul routes so fields and lanes survive the day.
5. Clean handoff: rake, magnet roll; photos/docs on request; pad preserved or removed per scope.

Out Links: Pick Your Next Move

Interior Gut Demolition — Surgical Tear-Outs, Zero Circus

Kitchens, baths, basements, offices — Demolition Don strips interiors clean without turning your place into a dust bowl. Protection goes up first, utilities are made safe, and materials exit in a steady flow so your build-back can start on time. We keep the noise down, the neighbors calm, and the walkways clear.

What We Remove

• Finishes: drywall/plaster & lath, tile, mud beds, thinset, paneling, wallpaper, ceilings.
• Floors: hardwood, laminate/LVP, VCT/LVT, ceramic/stone, carpet & pad, subfloor (as scoped).
• Fixtures: cabinets, tops, vanities, tub/shower units, mirrors, doors/frames, built-ins.
• Mechanical: duct branches, registers, bath fans, non-active piping & abandoned conduit (safe-capped).
• Debris: sorted loads — metal, clean concrete, wood/gypsum — for fast, clean haul-off.

Hazmat (asbestos/lead/mold) is coordinated with licensed partners when required — we align schedules so your project doesn’t stall.

Our Process: Plan • Protect • Perform • Pass-Off

1. Scope lock-in: what goes/what stays, protection plan, elevator/egress routes, quiet hours.
2. Make-safe: utilities verified; cap/lockout per code; dust walls & negative air where needed.
3. Sequenced demo: fixtures → finishes → framing (as scoped) — tidy, labeled, and stacked.
4. Debris flow: steady carting or chute; no “mountain of mess” days.
5. Clean handoff: sweep/vac, magnet roll, photos and diversion tickets on request.

Out Links: Pick Your Next Move

Selective Structural Demo + Shoring — Open the Space, Keep the Building Standing

Taking out structure is not a guess. We bring engineered temp shoring, needle beams, post shores, and sequence the cuts so gravity never gets a vote. Load paths are managed, inspectors are happy, and you get clean openings and removals without the heartburn.

*Permanent steel installs coordinated with your GC/engineer or our trusted steel partners per stamped drawings.

What We Handle

• Load-bearing wall removal: wood/steel/CMU with engineered temp shoring.
• New openings: doors, passthroughs, window/curtain-wall conversions with lintels/headers.
• Beam/column removals: demo with temp supports; permanent steel by partner per plans.
• Slab/beam cuts: sawcutting, coring, trenching with shoring of adjacent structure as required.
• Occupied sites: dust walls, negative air, quiet hours, phased access, and clear egress paths.

Method That Doesn’t Miss

1. Plan: review stamped drawings, verify loads/spans, locate utilities, lock-out/tag-out.
2. Protect: floor/wall protection, dust containment, overhead protection, pedestrian routes.
3. Shore: set posts/needles/cribbing, pre-load if specified, verify with level/layout.
4. Cut & Remove: saw, chip, torch as specified — controlled sequence with spotters.
5. Turnover: temp support remains until inspector sign-off/permanent steel is in.

Documentation on request: photos, inspection sign-offs, diversion tickets, and daily reports.

Out Links: Pick Your Next Move

Load-Bearing Wall Removal — Open the Room Without Gambling the Roof

You want open concept; your house wants to stay standing. We bring engineered temporary shoring, needle beams, and a clean sequence so the load path is controlled from the first jack to the last fastener. Inspectors stay happy, floors stay level, and you get a perfect opening for your new beam.

*Permanent steel/LVL installation coordinated with your GC/engineer or our trusted partners per stamped drawings.

What We Handle

• Wall removals: wood/steel/CMU bearing walls, demising walls, and chases.
• Openings: new door/pass-through spans with lintels/headers per plan.
• Temporary works: post shores, hi-load, needles, cribbing, pre-load if specified.
• Service reroutes: electrical/plumbing/HVAC in wall—safe cap and coordination.
• Clean turnover: debris out, area swept, temp support left in until inspector sign-off.

Method That Doesn’t Blink

1. Plan: verify loads/spans, read drawings, locate utilities, pull permits.
2. Protect: dust walls, floor protection, negative air where needed.
3. Shore: set posts/needles, confirm level and deflection limits.
4. Cut & Remove: controlled demo, saw/cutback, label and save where specified.
5. Handoff: opening ready for steel/LVL install and inspection.

Out Links: Pick Your Next Move

Kitchen Demolition — Clean Tear-Outs, Build-Back Ready

Cabinets, counters, backsplash, floors, soffits — gone without turning the rest of your home into a jobsite. We protect paths, cap utilities, sequence the tear-out, and keep debris moving so your installer can roll right in. Dust under control, neighbors calm, schedule tight.

Hazmat (lead/asbestos/mold) routed to licensed partners when required — we coordinate so timelines stay intact.

What We Remove

• Cabinetry & tops: bases, uppers, islands, peninsulas; laminate/granite/quartz/marble/butcher block.
• Tile & backsplash: tile/stone/glass with thinset or mud bed — wall repair by others.
• Flooring: tile (thinset/mud), hardwood, LVP/laminate, vinyl sheet; subfloor removal if scoped.
• Fixtures & vents: sinks, disposers, faucets, hoods/ducts; safe disconnect & cap.
• Appliances: fridge, range, cooktop, wall oven, micro, dishwasher — haul-off on request.

Our Process: Plan • Protect • Perform • Pass-Off

1. Scope lock-in: what stays/goes, reuse/salvage, path protection, elevator/quiet hours.
2. Make-safe: water/gas/electric verified and capped, dust walls/negative air as needed.
3. Sequenced demo: appliances → counters → cabinets → backsplash → floors → soffits.
4. Debris flow: steady load-out or chute — no mountain of mess.
5. Clean handoff: sweep/vac, magnet roll; photos & diversion tickets on request.

Out Links: Pick Your Next Move

Bathroom Demolition — No Floods, No Dust Storms, Just Clean Prep

Tile, mud beds, cast-iron tubs, glass doors — gone without wrecking the rest of the house. We protect paths, cap water and power, run dust control, and keep debris flowing so your tile setter and plumber can get right to work. Tight spaces, occupied homes, condo rules — handled.

Hazmat (lead/asbestos/mold) is coordinated with licensed partners when required — we align schedules so you don’t slip.

What We Remove

• Tile & substrates: walls, floors, shower pans, ceilings; thinset, mud bed, cement board, waterproofing.
• Tubs & showers: cast iron, steel/acrylic, fiberglass units, glass enclosures, steam components.
• Fixtures: vanities, tops, mirrors, medicine cabs, toilets (pull/reset by arrangement), fans & lights.
• Walls & ceilings: drywall or plaster & lath as scoped; framing exposure for trades.
• Debris: sorted loads for speed and clean disposal; magnet-roll finish.

Our Process: Plan • Protect • Perform • Pass-Off

1. Scope lock-in: what stays/goes, reuse/salvage, condo/quiet hours, elevator scheduling.
2. Make-safe: shut/cap water & gas, verify electrical, dust walls & negative air where needed.
3. Sequenced demo: fixtures → glass → walls → pans/floors → ceiling → framing per scope.
4. Debris flow: steady load-out or chute; no mess mountains in your hallway.
5. Clean handoff: sweep/vac, magnet roll, photos & diversion tickets on request.

Out Links: Pick Your Next Move

Basement Demolition & Flood Cuts — Dry It Out, Tear It Out, Make It Right

Water came in and your basement took the hit. We strip wet finishes fast — precise flood cuts, insulation out, flooring up, ceilings down where needed — and set you up for dry-out and rebuild. Clean paths, capped utilities, steady debris flow. Less chaos, more comeback.

Mold/lead/asbestos handled with licensed partners where required — we coordinate so timelines don’t slip.

What We Remove

• Walls: drywall/plaster flood cuts (12–48" or full), insulation & vapor barriers, base/trim.
• Floors: carpet & pad, tack strip, laminate/LVP, hardwood, tile w/ thinset or mud bed, sleepers.
• Ceilings: drywall or drop ceiling grid/tiles; open for MEP inspection when needed.
• Built-ins & fixtures: closets, paneling, vanities, cabinets, non-structural partitions.
• Debris & disposal: sorted loads — metal/clean concrete/wood/gypsum — fast haul-off.

No liquids, fuels, paints, or hazardous waste in dumpsters. Tell us about chemicals — we’ll route properly.

Our Process: Plan • Protect • Perform • Pass-Off

1. Assess: moisture mapping, set cut height, verify utilities, protect paths & stairs.
2. Make-safe: power/water/gas confirmed; pumps/dehu placement coordinated.
3. Demo sequence: contents out (if scoped) → flooring → wall cuts → insulation → ceilings as needed.
4. Debris flow: tidy staging and steady load-out — no soggy mountain in the driveway.
5. Handoff: sweep/vac, magnet roll; space open for drying and rebuild trades.

Out Links: Pick Your Next Move

Attic Demolition — Low Headroom, High Standards

Tight hatches, knee walls, blown-in insulation, sketchy planks over joists — we strip attics clean without turning your house into a snow globe of dust. Walk paths get protected, utilities are made safe, and materials leave the building in a steady, calm flow. You get a clean, open deck for vents, foam, new framing, or a proper finish-out.

Suspected vermiculite/other hazardous materials? We coordinate testing and licensed abatement where required so your schedule stays honest.

What We Remove

• Finishes & partitions: knee walls, storage cubbies, drywall/plaster, paneling, old shelving.
• Flooring/decking: plank decks, plywood, stray platforms; careful removal to protect ceilings below.
• Insulation: blown cellulose, loose fiberglass, batts, foam remnants — bagged/HEPA vac assist as needed.
• MEP odds & ends: abandoned ductwork, bath fans/vents, coax/phone, antennae — safe-capped & removed.
• Airflow clean-up: blocked soffits cleared, baffles pulled/saved per scope, old radiant barriers removed.

We don’t put liquids/chemicals into dumpsters. Tell us about paints, fuels, or pesticides — we’ll route properly.

Our Process: Plan • Protect • Perform • Pass-Off

1. Plan: confirm access (hatch/pull-down/stairs), measure clear openings, map debris route, verify utilities.
2. Protect: floor runners, door seals, dust walls/negative air, attic-safe lighting and temp rails.
3. Perform: contents out (if scoped) → finishes → insulation → decking → MEP removals — steady and contained.
4. Debris flow: bag & carry, chute, or rooftop to container — no mess mountains.
5. Pass-off: sweep/vac, magnet roll, photos/diversion tickets on request; ready for your next trade.

Out Links: Pick Your Next Move

Fireplace & Hearth Removal — Brick by Brick, Zero Dust Drama

Stone surround, brick hearth, gas insert, old wood stove — we dismantle it cleanly, control dust and vibration, and protect the home like it’s ours. Lintels are checked, loads are supported where required, utilities are made safe, and debris exits without turning your living room into a quarry.

Roof patching/flashing and interior finish work by others — we coordinate with your GC/roofer for a smooth handoff.

What We Remove

• Units: masonry fireboxes, prefab boxes, gas/electric inserts, wood stoves & venting.
• Finishes: brick/stone/tile surrounds, mantels (wood/stone/metal), hearths & ash clean-outs.
• Chase & flue (interior portions): clay flue tiles, double-wall pipe, chase framing to ceiling/roof line per scope.
• Make-safe: gas shut/cap by licensed plumber; electrical disconnect; smoke shelf debris controlled.
• Debris & recycling: masonry, metal, and appliance separation for fast haul-off.

Our Process: Plan • Protect • Perform • Pass-Off

1. Plan: confirm structure, lintel support, utilities, debris routes; protect floors & adjacent finishes.
2. Make-safe: gas/electric verified; dust walls & negative air; cover returns & isolate work zone.
3. Perform: surround → mantel → insert/stove → firebox/hearth → chase/flue sections (as scoped).
4. Debris flow: staged, contained carry-out — no “brick mountain” in the foyer.
5. Pass-off: sweep/vac, magnet roll; ready for framing/patch, new unit, or clean wall.

Out Links: Pick Your Next Move

Masonry Chimney Removal — Brick Down, Roof Tight, No Surprises

Leaning stack, failing crown, leaks around flashing — we dismantle chimneys safely from the top down, control debris, protect the roof and interiors, and button up the opening so your home stays dry. Interior chases, exterior stacks, through-roof or through-wall — handled cleanly.

Permanent roofing/flashing by owner’s roofer or our trusted partners. We coordinate so the hole is never left open to weather.

What We Remove

• Stacks: brick/block masonry above roofline, full height to basement if scoped.
• Flues & liners: terra-cotta tiles, metal liners, caps, crowns, spark arrestors.
• Chases & surrounds: drywall/plaster, framing, stone/brick veneers, mantels (as scoped).
• Footings & hearths: chimney footings, interior hearths, ash pits — with selective slab sawcuts.
• Debris & recycling: masonry + metal separation; clean load-outs that won’t wreck your driveway.

Our Method: Plan • Protect • Perform • Pass-Off

1. Plan: verify structure and proximity to framing; map debris route; coordinate roofer window.
2. Protect: roof pads/boards, interior dust walls, floor protection, negative air if needed.
3. Perform: top-down dismantle, tile-out of flue, chase removal, footing breakout per scope.
4. Patch: temporary weatherproofing and sheathing; roofer ties-in permanent flashing/shingles.
5. Pass-off: sweep/vac & magnet roll; photos, inspection sign-offs, and dump tickets on request.

Lead mortar, asbestos-containing materials, or vermiculite encountered? We pause, test, and route to licensed abatement partners to keep you compliant.

Out Links: Pick Your Next Move

Roof Tear-Off — Asphalt, EPDM, TPO… Off the House, Not on Your Lawn

We strip roofs fast and tidy — shingles, felt, nails, membranes, insulation — without turning your driveway into a scrapyard. Landscape tarps go down, magnets sweep the grounds, and the deck is ready for your roofer. Steep pitches, tight alleys, busy streets — bring it.

Need new roof install? We coordinate with your roofer or connect you with a trusted crew. Asbestos-containing roofing is routed to licensed abatement partners.

What We Remove

• Steep & low-slope: asphalt shingles, felt/ice shield, nails/staples; EPDM/TPO/mod-bit membranes & insulation.
• Flashings & accessories: pipe boots, chimney/step/ridge flashing, drip edge (as scoped), ridge vents.
• Penetrations: skylights (pull or protect), fans, power vents, satellite mounts, abandoned equipment.
• Deck prep: light deck repairs per scope, fastener pull & re-sheath recommendations where needed.
• Debris & magnets: staged toss zones, clean loads, and full magnet sweep — your tires stay happy.

Our Method: Plan • Protect • Perform • Pass-Off

1. Plan: map pitches, access, toss zones, utilities, and neighbor/HOA requirements.
2. Protect: landscape/netting tarps, plywood paths, window/awning shields, interior dust control if needed.
3. Perform: ridge-to-eave tear-off, membrane peels, fastener pull, selective flashing removal.
4. Inspect: deck condition walkthrough; photo notes for your roofer/insurer.
5. Pass-Off: magnet sweep, gutters cleared, site broom-clean and ready for install.

Fall protection, edge control, and weather calls are non-negotiable. If wind pops off, we pause and protect.

Out Links: Pick Your Next Move

Skylight & Curb Removal — Glass Out, Roof Tight, No Leaks

Old, fogged, or leaking skylights? We remove units and curbs cleanly, protect finishes below, and coordinate patch-in so you’re not staring at the weather. Pitched or flat roofs, single units or a dozen — we dismantle, stage, and load-out without peppering your lawn with nails.

Permanent roofing/flashing by your roofer or our trusted partners. We schedule together so openings are never left to chance.

What We Remove

• Units: fixed/vented/glazed skylights, acrylic domes, tubes & diffusers, abandoned shafts.
• Curbs & flashing: wood/metal curbs, step/target flashing, membrane tie-ins, old sealants.
• Interior: light wells, drywall/plaster finishes at shaft, trims and returns as scoped.
• Accessories: motors, switches, blinds, sensors — safe disconnect and removal.
• Debris: glass-safe handling, clean loads, full magnet sweep — no surprises in the driveway.

Our Method: Plan • Protect • Perform • Pass-Off

1. Plan: measure units, verify curb condition, map toss zones, line up roofer patch window.
2. Protect: interior poly tents, floor runners, roof pads, negative air as needed.
3. Perform: glass removal → frame/curb demo → flashing peel → membrane prep.
4. Patch: temporary weatherproofing; roofer ties-in permanent deck/sheathing & membrane or shingles.
5. Pass-Off: sweep/vac & magnet roll; photos and dump tickets available on request.

Asbestos/coal-tar or brittle legacy roofing? We pause, test if needed, and route work appropriately.

Out Links: Pick Your Next Move

Roof Deck Removal — Sheet by Sheet, No “Soft Spot” Surprises

Plywood delaminating, plank/T&G spongy, leaks at the eaves — we strip roof decks clean and safe. Shingles/membranes come off, fasteners are pulled, bad sheets pop, framing is exposed for your roofer, and the site stays tidy. Steep pitches, tight toss zones, busy streets — handled.

Permanent re-sheathing and roofing by your roofer or our trusted partners. We coordinate windows so weather never wins.

What We Remove

• Decking: plywood/OSB sheets, plank & tongue-and-groove boards, rotted sections, delam edges.
• Underlayment: felt, ice & water, peel-and-stick, adhesives, nails/staples/ring-shanks.
• Accessories: abandoned curbs, nailers, sleepers, satellite/antenna bases, misc. brackets.
• Insulation (as scoped): wet batts, rigid boards, foam remnants, vapor barriers.
• Debris & recycling: clean loads, magnet sweeps, driveway & landscape protection.

Our Method: Plan • Protect • Perform • Inspect • Pass-Off

1. Plan: confirm pitches, spans, power lines, toss zones, HOA/permits, roofer coordination.
2. Protect: landscape/net tarps, plywood shields, interior poly if needed, roof pads/rails.
3. Perform: tear-off → fastener pull → sheet/plank removal → blocking/nailer demo.
4. Inspect: expose framing, photo deck/rafter/truss condition for your roofer/insurer.
5. Pass-Off: magnet sweep, gutters cleared, deck ready for re-sheathing and underlayment.

Asbestos/coal-tar or brittle legacy membranes? We pause, test if needed, and route to licensed partners.

Out Links: Pick Your Next Move

Rooftop HVAC / RTU Removal — Heavy Metal Off Your Roof, Schedule On Point

Old package units, curbs, duct boots, abandoned economizers — gone without scaring your deck or your neighbors. We handle disconnects, rigging, lift plans, street permits, and curb patch coordination so the only thing left behind is clean roof and a signed ticket.

Permanent roofing/flashing by your roofer or our partners. EPA-compliant refrigerant recovery is non-negotiable.

What We Remove & Coordinate

• Units & accessories: package RTUs, split condensers, air handlers, economizers, curbs, rails, vibration pads.
• Services: electric lock-out/tag-out, gas shut/cap by licensed plumber, line set purge/cap.
• Rigging & lifts: crane/moffett/forklift picks, roof protection, lift plans, streets & sidewalk closures.
• Openings: curb/demo patch coordination, temp dry-in, debris control, magnet sweep.
• Documentation: recovery certificates, photos, dump tickets, and close-out as requested.

Our Method: Plan • Protect • Perform • Patch • Pass-Off

1. Plan: site walk, lift heights & radii, unit weights, rig path, permits & neighbor notices.
2. Protect: roof pads/rails, landscape tarps, interior dust walls under penetrations.
3. Perform: disconnects & recovery → rig → lift → curb/penetration demo as scoped.
4. Patch: temp weatherproof; roofer completes permanent tie-in per schedule.
5. Pass-Off: broom-clean, magnet sweep, documentation delivered.

Wind too spicy or streets too tight? We re-slot the lift window and keep you covered. Safety wins every time.

Out Links: Pick Your Next Move

Concrete Slab & Sidewalk Demolition — Cut, Break, Load, Gone

Driveways, patios, garage slabs, sidewalks, curbs — we make concrete disappear without chewing up your lawn or scaring the neighbors. Sawcuts are straight, breaks are controlled, loads are clean, and we leave a tidy subgrade ready for your next trade.

Public sidewalks/curb work may need permits or DOT sign-off. We coordinate locates and street occupancy when required.

What We Remove

• Slabs & walks: 3–8" residential slabs, sidewalk flags, stoops, porch tops, stamped concrete.
• Reinforcement: wire mesh, #3/#4 rebar grids, welded bar at joints, dowels at foundations.
• Sawcut & separation: clean control joints, trench-cutting, curb cuts, straight edges against “keep” areas.
• Subbase extras: sleepers, pavers under slab, thin overlays, bonded toppings.
• Debris & recycling: concrete-only loads, metal separation — we keep dump fees honest.

Our Method: Plan • Protect • Perform • Pass-Off

1. Locate: 811/utility locates, mark-outs, verify drains/irrigation.
2. Sawcut: dust-controlled perimeter and trench lines; protect doors, siding, and glass.
3. Break & lift: breakers/hand tools/skid steer/mini-ex as access allows; rebar torch or cut-off.
4. Load-out: clean concrete loads, no soil contamination unless requested.
5. Handoff: grade rough-in on request, broom-clean, photos & dump tickets available.

Tight access? We go smaller and go steadier. Close to foundation? We isolate and break soft to avoid shock.

Out Links: Pick Your Next Move

Asphalt Driveway & Parking Lot Demo — Cut It Clean, Peel It Fast, Roll Out Quiet

Alligator cracks, potholes, sunken spots, or you just hate the look — we make asphalt disappear. Sharp sawcuts at tie-ins, tidy peels with the right iron, clean loads to recycling, and a site that’s ready for base work or new blacktop without the chaos.

ROW work, street closures, and milling in public ways may require permits. We line up traffic control so neighbors don’t stage a coup.

What We Remove

• Surfaces: residential driveways, commercial/retail lots, alleys, private roads, cart paths.
• Depths: overlays, binder & wear courses, full-depth asphalt over stone or concrete.
• Edges & features: curbs, wheel stops, speed humps, islands, bollards (as scoped).
• Sawcuts & tie-ins: clean separations at apron, garage slab, sidewalk, or street joints.
• Debris & recycling: asphalt-only loads to RAP recycling; metal separated to keep fees honest.

Our Method: Plan • Protect • Perform • Pass-Off

1. Plan: confirm utilities, access width, truck path, and any live-traffic controls.
2. Protect: cones, signage, driveway shields, garage/door protection, dust management.
3. Perform: perimeter sawcut → peel or mill → load-out → subgrade review with photos.
4. Pass-Off: broom & magnet sweep; ready for base repairs, compaction, and new asphalt.

Tight drive, fancy pavers, low wires? We scale the gear and keep the edges crisp.

Out Links: Pick Your Next Move

Concrete Wall & Foundation Demolition — Cut True, Break Clean, Keep the House Safe

Basement walls, CMU partitions, retaining walls, failed footings — we demo concrete where structure and safety actually matter. Sawcuts are straight, shoring is engineered, utilities are respected, and debris leaves in clean loads so your next trade starts clean.

Underpinning, temp shoring, and dewatering are coordinated up front — no gambling with your foundation.

What We Remove

• Structural: poured concrete walls, CMU/block walls, retaining walls, buttresses, pilasters.
• Footings: strip/spread footings, grade beams, stem walls — selective breakout to plans.
• Saw & core: door/window openings, beam pockets, sleeves (2"–18" cores), trench lines.
• Waterproofing & drains: membranes, parge coats, drain tile & stone backfill (as scoped).
• Debris: concrete-only loads with metal separation for cheaper tipping and clean sites.

Our Method: Plan • Shore • Saw • Break • Haul • Pass-Off

1. Plan: review drawings, verify load paths, mark utilities, call 811, set baseline photos.
2. Shore: temp bracing/needle beams or engineered shoring where required.
3. Saw: dust-controlled wall saws & wire saws; cores for clean sleeves and dowels.
4. Break: controlled breaks with electric/hydraulic tools; low-vibration near fragile finishes.
5. Haul: staged load-out, clean concrete recycling, magnet sweep, sump/pump control if needed.

Silica safety is non-negotiable — wet cuts, vacs, and masks so your space stays livable.

Out Links: Pick Your Next Move